Xtremehorticulture

Not Too Late to Fertilize

Q. My schedule was to fertilize my citrus plants on President’s Day but because of the drop in the temperatures, I decided to postpone. It has stayed cold. So, when should I fertilize? Keep fertilizer away from tree trunks so it doesn’t damage the tree. A. Everything has slowed down because of the low temperatures. As soon as it warms up would be fine. If they need some extra help, consider foliar feeding them with a tomato-type water soluble fertilizer in three or four weeks.  Don’t forget to apply iron either in the soil or combined with your foliar feeding. Cold, wet cloudy weather did not let many honeybees out for pollination so these early flowering trees may not have very good fruit set.

Not Too Late to Fertilize Read More »

Lime Tree Pruning Tips

Q. Please give some tips on pruning my three-year-old sweet lime tree: when to prune, how tall to keep its growth on my limited backyard space, fertilizing, and does the tree have to be pruned annually?  Readers young lime tree A. Read most information on pruning of citrus and it will tell you to prune citrus very little. Citrus of any type have few issues that need correction by pruning. They do not need to be pruned to improve fruit production like other fruit trees. Reasons for pruning citrus             The primary reasons for pruning citrus are to reduce its size, remove problems like crossing and broken branches, and some thinning to reduce excessive growth.             They do need to be pruned if you want to keep them smaller. They can be pruned to backspace to about 60% of their mature size. But it should be done every year.             Prune just after harvesting the fruit so that it doesn’t interfere with next year’s flowering and fruit production. This is also the best time to apply fertilizer. Light pruning with a hand shears and applications of fertilizer can be done anytime of the year. First, control its height Identify backspace stems backspace contributing to an undesirable height. These will be vertical or nearly vertical. Follow the stems along their entire length and remove them, entirely, at the point where they become vertical. This may be somewhere deep inside the canopy. It doesn’t matter if that’s the case. Remove them with a clean, close cut.             The tree wants to become tall. You want the tree to stay smaller. This is where you are at odds with tree. You must control the tree, it should not control what you want. Get rid of vertical growth             The best production of fruit comes from stems that are NOT vertical. Consistent fruit production comes from stems that are near horizontal or no more than 45° above horizontal. Reduce its width if needed             If the width of the tree is a problem, reduce the length of horizontal or near horizontal stems. To do this, follow the length of the offending stem toward the inside of the tree. Remove the portion of this stem that is offensive at a juncture with another stem. DO NOT LEAVE STUBS. Remove crossing or broken limbs             Adding fertilizer to plants, particularly those high in nitrogen (the first number on the bag), should be done every year to maintain a high level of fruit production. But the amount applied should be adjusted according to the needs of the plant. If the tree is growing excessively, reduce the amount of fertilizer applied but don’t eliminate it.

Lime Tree Pruning Tips Read More »

Cool Wet Spring Perfect for Fireblight

Bacterial diseases like fireblight need openings to enter the susceptible plant. Flowers provide temporary openings and let this disease enter inside plants. So do fresh pruning cuts. Fireblight disease spreads from infected to uninfected plants through these openings. Rainy and windy weather helps spread this disease when flowers are open. Honeybees are suspected to spread this disease as well by visiting these flowers. Cool, rainy weather when pear and apple are in bloom, is perfect weather for fireblight disease. Fireblight is a very aggressive and dangerous plant disease that shows up as new infections in about May in Asian Pear, European pear like Bartlett and some apples. It can be a major problem on Quince as well. This is why the first evidence of fire blight disease is usually seen by the blackening of the flowers in late spring. From here it can spread into branches and cause severe problems.             But the disease problem, although unseen, can begin now. The point of entry for this disease into susceptible plants are the open flowers and fresh pruning cuts. Open flowers and fresh pruning cuts provide “fresh wounds” or points for this disease to enter inside the plant. Wind and rain are the usual culprits that spread the disease from plant to plant but even honeybees can be responsible. Fireblight has spread from a flower or pruning cut and caused more dieback.             If this disease is seen early enough (usually in late April or May) it can be eliminated easily with a few snips of a sanitized hand pruner, eliminating the infection. But the hand pruner must be disinfected between each cut on the tree or the disease can be spread on the hand pruners through each cut. Classic textbook dieback and progression of fireblight disease             There is some disagreement about what to use to disinfect hand pruners but chlorine bleach seems to be the favorite among orchardists. Heat from the open flame a cigarette lighter also seems to work. Some people suggest alcohol and others suggest household cleaners like Pine-Sol.             Plants that were infected in previous years will show evidence of this disease when new growth occurs in the next couple of weeks. As the name suggests, this damage resembles the black from fire damage. This can be confusing because any damage to pear leaves can turn black. If you are unsure, send me a picture.             We have had a surge in this bacterial disease over the past few gardening seasons because of our cool wet springs. I will post more pictures of this disease from past years on my Internet blog, Xtremehorticulture of the Desert.

Cool Wet Spring Perfect for Fireblight Read More »

Keep Compost Away from Young Plants

Q. When I apply compost to plants, do I avoid the main trunk area or do I apply up to the trunk?   A. If soils have no plants in them, I use about 1 inch layer of compost applied to flowerbeds and vegetable beds every year. This compost is turned under or rototilled into the soil before planting.  Compost can be used as a substitution for fertilizer in vegetable and flower beds even when plants are actively growing in them as long as you can see bare soil. Apply the compost to the soil between the plants or between rows and water it in.  Compost can be applied to the soil surface and watered into the soil and act like a fertilizer Compost can be applied to fruit trees in a circle around the trees under the canopy where the soil is wet. The compost should not be piled against the trunks of the trees.  Compost can be added around fruit trees to the soil surface but keeping in from contact with the tree directly and then watered in. It is very effective when combined with a surface layer of wood chips. Compost can be applied around desert landscape plants on top of coarse rock mulch. If the rock is coarse enough, it can be washed onto the surface of the soil under the plant canopy through the rocks with a hose. It is best if straight compost does not come in contact directly with soft succulent plants or young trees. Compost tea brewer, top, and applying compost tea with an injector directly into the soil. Compost can also be put in with pure water and allowed to “seep” just like tea in a tea bag. The water separated from this combination, compost tea, can be used as a liquid fertilizer and in some cases helps reduce disease problems in the soil or when used as a spray on the foliage.  After the tea has been made the compost can still be used as a soil amendment, but, of course, wit;h a lower nutrient content. Be careful, though, the type of compost used can make this tea solution very concentrated and can harm plants unless it is diluted with water. It is good to use a salinity meter to judge whether it is safe to apply to foliage directly without dilution or knowing how much to dilute it. The salmity of the compost tea should be below 4 mmhose/cm or dS/m. 

Keep Compost Away from Young Plants Read More »

Compost Should Finish Its Cycle before Application

Q. How do I know when compost is safe to apply to plants? Do I measure temperature? A. Compost is safe to apply when the composting process has completed. Look and smell a compost to see if it is finished. A finished compost will have the same color throughout and the components are not recognizable. Everything looks the same. Finished compost should have a dark color, the color should be consistent through the compost and the components used tof composting are not distinguishable.  Commercial compost is safe to apply any time it has finished the composting cycle. Most commercial compost is never sold or marketed before it is finished. The components of a compost will eventually break down and supply nutrients to plants separately but there are some problems doing it this way. Composting is the same process used by Mother Nature when things “rot”. But in composting, this rotting process is sped up and managed. If you are making your own compost, it is probably a good idea to purchase a compost thermometer. The type of composting I would use is pile composting. This method mixes all the components together and puts it in a moist pile. The fastest way to get a finished compost using this method is by turning this pile or aerating it when the core of the compost reaches 160° F and wetting it down. A slower method is the static pile composting method where the pile is never turned. There are much fancier ways of making compost like using forced air or in-vessel composting which can finish compost extremely fast.

Compost Should Finish Its Cycle before Application Read More »

Soil: They Don’t Live in the Desert

Soil: the upper layer of earth in which plants grow, a black or dark brown material typically consisting of a mixture of organic remains, clay, and rock particles. (Oxford Dictionaries, online version) Typical Mojave  (or Mohave) Desert scene             It is obvious the authors who wrote this popular definition of soil did not live in the Inland Empire, Great Basin, Mojave (or Mohave), Sonoran or Chihuahuan deserts. Is it any wonder that people moving into desert environments from less agri-hostile locations have so much difficulty growing things? The importance of soils in desert production should not be underestimated. The further a plant is from its native environment, the more time, energy and money is needed for it to perform satisfactorily. When we design landscapes with plants less suitable to desert environments, we can be certain man-hours and resources must be increased resulting in higher costs and increasing budgets. Selecting the right plant, planting it in the right location, in the right soil and managing that soil correctly is paramount to managing limited resources efficiently. When I was studying at the University I was taught that the average soil for plant production should have test results like these: pH of 6.5-7.5, organic matter content of 3 to 5%, maximum salinity less than 4.0 mmhos/cm (dS/m) and a porosity (collective air spaces) of approximately 50%. As an inexperienced student, I assumed soils outside of these ranges would extensively damage or even kill plants. Typical raw Mojave Desert soil, low in organic matter, pH 8.2 and higher and never has been cropped or developed. Then I moved into the Mojave Desert and became aware that plants could live outside of these ranges. Valid soil tests from desert soils under development, but already growing honey mesquite, rabbit brush, desert sage, creosote bush, Opuntia, Cholla, Agave and other desert species, routinely provided a pH of 8.2 and above, organic matter content that was not measurable, salinity exceeding 100 dS/m and toxic salt levels like boron over 50 ppm. I knew I wasn’t in plant Hell, but thought I could see it from here. Studying and working in the arid and desert West and finally the deserts and arid regions of the Middle East, Central Asia and northern and southern Africa I have learned that nearly any desert soil is manageable. Management decisions change when the plant palette changes. Orchard management in Ethiopia My personal definition of soil has changed. Soil is a mixture of substances, either natural or man-made, which will grow plants if properly managed. Irrigated desert soils must be managed if they are to grow plants. Soils do not need to be black or dark brown and they may not have organic matter in them but they will still grow plants. Years ago friends of mine at the University of Sonora in Hermosillo taught me a valuable lesson about amending desert soils. I began production trials of two selections of edible Opuntia from Sonora, Mexico. I planted pads the same distances they were planted at the field station in Hermosillo. They were planted in unamended, raw Mojave Desert soil at UNLV’s Center for Urban Horticulture and Water Conservation in North Las Vegas, Nevada. Nopal cactus from Hermosillo, Mexico, (USON) planted without organics (left( and with organics (right) after two years (left) and one year (right). One year later faculty from the University of Sonora came to visit the plots and see the progress that was made. The Opuntia were all growing but I was disappointed in their progress and production of nopales (edible immature pads) and tunas (cactus fruit). They asked me if I had amended the soil with composted manure before I planted the pads. I had not. I assumed that because these were desert plants they would perform better in a desert soil that was not amended. I was wrong. We replanted a second area with fresh pads of the same varieties, this time amending the soil with composted manure. The results were remarkable. The second planting of Opuntia caught up to the older planting early in the first growing season and exceeded it soon afterwards. This was my first lesson: desert plants might tolerate unamended desert soils but they may not thrive in them. The desert provides a unique environment for the evolution of soils and plants that can grow in those soils. High temperatures, low humidity, intense sunlight and lack of rainfall contribute to desert soil’s unique appearance, structure, biology and chemistry. Once water is added to this mix, everything changes and it can change rapidly. This does not mean desert soils should not be improved. They can and should be improved if we are to grow a wide range of plants. But it is important to understand that amendments produced in desert environments may have different qualities from amendments produced in wetter, cooler climates. Desert soil improved with compost for vegetable production. It will be deeply incorporated and the  amended soil shaped into beds for production. Two major problems which can occur in soil amendments produced in desert environments are high levels of salts and difficulty in wetting (hydrophobic) the amendment due to a very low moisture content. These are frequent criticisms of amendments and composts produced in desert climates. Salinity problems arise from a high total salt content in the amendment or from specific compounds which contain elements that can damage plants. Specific elements that can damage plants, and should be reported in laboratory tests by suppliers, include boron, sodium and chlorides. With some monitoring by amendment producers, levels of these specific elements that can be damaging to plants can be lowered or minimized. Salt damage to Meyer lemon. Total salinity of amendments produced in desert climates may be a problem if the range in salinity acceptable for soil amendments is 3 – 4 dS/m and poor quality water, such as Colorado River water, is used to leach excessive salts. It takes more water to reduce salts in desert environments than in wetter climates. More water

Soil: They Don’t Live in the Desert Read More »